Getting Started
Power on the headset by pressing and holding the power button for 3-5 seconds.
Place the headset on your head, and adjust to fit using the silver dial at the back of the headset.
Power on the controllers by pressing and holding the “Pico logo” button on each controller
Entering the VR World
Once the headset and controllers are turned on, you’ll be greeted with a “Welcome Back” menu. Here you choose between “Sitting” or “Standing” mode, and will have the ability to choose your “Boundary” size.
Using the trigger button on either controller, make your selections for each option, and hit “Finish”.
Connecting to the Network
Once in the VR world, you’ll see a control bar at the bottom of the display directly in front of you
Hit the WiFi symbol on the control bar
Select “WLAN” in the left-hand plane, if not already selected
Select the Site-guest network from the list of SSIDs.
Turning MAC Randomization Off
From the WLAN menu where you selected the Site-guest SSID
Press and hold the trigger button on either controller, and motion up with your hand to scroll to the bottom of the menu.
Select “Advanced Options”.
A “WiFi” menu will appear with the Site-guest SSID displayed at the top
Select the gear icon to the right of the SSID
A “Network Details” menu will appear
Select “Advanced” at the bottom of the menu
Select the “Privacy” option
Select “Use Device MAC”
Return to the Home Screen
Select the left-facing “back arrow” at the top of the “Network Details” menu
Select the left-facing “back arrow” at the top of the “WiFi” menu
Select the “X” at the bottom of the “WLAN” menu